IMS DL200IM shower screen for DeLonghi Dedica series & Smeg

Product Features:

• Even Extraction: The 200 µm (micrometer) membrane ensures that water hits the coffee grounds gently and evenly across the surface.
• Less Mess: The extremely smooth surface ensures that significantly fewer coffee oils and particles stick to the screen. This keeps the brew group clean.
• Material Quality: Made from stainless steel (AISI 316), food-safe and resistant to corrosion.

Technical Details:

• Outer Diameter: 50.5 mm.
• Inner Diameter: 49.5 mm.
• Wall Height: 9 mm.
• Central Hole: 5.3 mm
• Central Bore: Fits the M5 screw of the Dedica.
• Filter Capacity: The membrane retains even the finest "fines" that could otherwise be sucked back into the solenoid valve.

Compatibility:

The IMS DL200IM was explicitly developed for DeLonghi brew groups with a central screw:

• DeLonghi Dedica Series: EC680, EC685, EC785, EC885 (Arte), EC890
• DeLonghi Icona & Scultura Series
• Smeg ECF01BLEU
• Not Compatible: E61 brew groups or 58mm commercial machines.

Delivery Contents:

• 1x IMS DL200IM precision shower screen.
• Note: The screw is not included; simply use the original screw from your DeLonghi.

What You Should Know Before Purchasing:

The shower screen optimizes water flow, but it's not a replacement for fresh beans or a good grinder. The IMS screen really shows its strengths when you switch to a single-wall screen like the KM 51mm Screen. With the original double-wall screens ("crema screens"), the taste difference is minimal.

The membrane is delicate by design. Clean the screen only with soft brushes or a cloth. Sharp objects will destroy the fine mesh immediately.

Assembly and Care:

Assembly is not rocket science, but it does require a bit of finesse:

1. Loosen Screw: Turn the DeLonghi upside down or use a short angled screwdriver.
2. Be Careful When Removing: Often the old screen is stuck tight. A gentle lever with a spoon handle helps.
3. Clean: Since you have the screen off anyway, wipe out the brew group with a damp cloth.
4. Installation: Insert the IMS screen and tighten the screw hand-tight. Do Not Overtighten! If you tighten the screw too much, the screen will warp and water distribution will suffer again. "Hand-tight" is perfectly sufficient. Overtightening can also damage the plastic thread.

We recommend a brief flush after each shot to rinse away residue. Since backflushing is technically barely possible on the Dedica, you should unscrew the screen every two weeks and clean it in hot water with a coffee degreaser. You'll see how much residue accumulates behind it despite daily rinsing.

Why are there small notches visible on the edge of the shower screen?

The marks on the edge shown in the picture are due to the manufacturing process and are normal for this shower screen. They do not represent damage and have no impact on the function or durability of the product.